Offline decoding

We are looking for people owning a CI module, and people using a softcam with a local smartcard (should be everyone!) to test the offline decoding capability of all OpenPLi supported hardware.

To test, do the following:

1. Stop the softcam, and remove all CI modules from the box
2. Make a short test recording from an encoded channel that uses a smartcard, using a timer, with Recording type "don't descramble, record ECM"
3. When done, do the same, but then from an encoded channel that uses the CI module
4. In case you have a smartcard that works in both a CI and with a softcam, one recording is enough.

Now play back the recording(s), to make sure your screen stays black.

1. Start your softcam again, make sure the smartcard is operational, and play the first recording back again.
2. If you now have an image, your box supports offline decoding via the softcam.
3. Stop the softcam again, insert the CI module with the smartcard, and play back the second recording.
4. If you now have an image, your box supports offline decoding via de CI.

Source: https://forums.openpli.org/topic/51311-help-needed-offline-decoding/#entry720296

Receiver	Softcam	CI
formuler1	yes	dunno
formuler3	yes	dunno
formuler4	yes	dunno
formuler4turbo	yes	dunno
hd11	yes	dunno
hd51	yes	no
hd1200	yes	dunno
hd1265	yes	dunno
hd1500	yes	dunno
hd2400	yes	no
hd530c	yes	dunno
vuduo2	no	no
vuduo	no	no
vusolo2	no	no
vusolo	no	no
vusolose	no	no
vuultimo	no	no
vuuno	no	no
vuzero	no	no
vuzero4k	no	no
vusolo4k	no	no
vuuno4k	no	no
vuultimo4k	no	no
fusionhd	yes	dunno
fusionhdse	yes	dunno
purehd	yes	dunno
et10000	yes	no
et5x00	yes	dunno
et6x00	yes	dunno
et7x00	no	dunno
et8000	yes	dunno
et8500	no	dunno
et9x00	yes	no
h3	yes	dunno
h4	yes	dunno
h5	yes	dunno
h7	yes	dunno
i55	yes	dunno
xp1000	yes	dunno
et4x00	yes	dunno
hd500c	yes	dunno
hd1100	yes	dunno
lc	yes	dunno
sh1	yes	dunno
miraclebox premium micro	no	dunno
miraclebox premium twin+	no	no
vimastec vs1500	yes	dunnno
edison osmega	yes	dunnno