Receivers:Xtrend
From OpenPLi Wiki
Revision as of 17:52, 6 May 2017 by Rick Hunter (talk | contribs) (Created page with "'''Supported receivers'''<br /> frame|right OS mini<br /> OS mini +<br /> OS mega<br /> '''How to flash the receiver...'''<br /> Download...")
Supported receivers
OS mini
OS mini +
OS mega
How to flash the receiver...
Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk.
FLASHING THE RECEIVER.
- Unzip compressed file.
- Copy the "et7x00" folder to a USB Pen Drive.
- Power off or reboot the receiver with the mains switch on the rear. Connect USB Pen Drive.
- Power on receiver with the mains switch on the rear.
- After rebooting or cold start the power LED will blink several times after some time. At that moment press the power button on the front panel.
- Flashing of the image will start
- Booting will start automatically once the flashing process has completed
Note: In order to load the image automagically, rename the file called "noforce" to "force"
