Receivers:Xtrend
From OpenPLi Wiki
Revision as of 17:58, 6 May 2017 by Rick Hunter (talk | contribs)
Supported receivers
- ET4x00
- ET5x00
- ET6000
- ET6500
- ET7000
- ET7500
- ET8000
- ET8500
- ET9000
- ET9200
- ET9500
- ET10000
How to flash the receiver...
Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk.
FLASHING THE RECEIVER.
- Unzip compressed file.
- Copy the "etxxxx" folder to a USB Pen Drive.
- Power off or reboot the receiver with the mains switch on the rear. Connect USB Pen Drive.
- Power on receiver with the mains switch on the rear.
- After rebooting or cold start the power LED will blink several times after some time. At that moment press the power button on the front panel.
- Flashing of the image will start
- Booting will start automatically once the flashing process has completed
Note: In order to load the image automagically, rename the file called "noforce" to "force"
