Axas

From OpenPLi Wiki
Revision as of 08:58, 5 October 2022 by 40H3X (talk | contribs)
Jump to: navigation, search
RECEIVERS-Axas-001.png
  1. Download image.
  2. unpack images. After unpacking, there is a folder "e4hd" with content.
  3. Copy this folder with content to a USB stick.
  4. Switch off the box at the power switch and insert the stick into the USB port on the side.
  5. Switch on the box at the mains switch and hold down the on/off button
  6. if there is a light on the usb stick, watch it and wait until is stops flashing
  7. When flashing is complete, remove the stick from the port.
  8. The box now starts and the basic settings can be made.