Difference between revisions of "Receivers:Formuler"

Revision as of 19:23, 30 April 2017

Supported receivers

F1
F3
F4
F4 Turbo

How to flash the image...
Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk.

FLASHING THE RECEIVER.

Power off the receiver
Ensure no other USB devices are plugged into the receiver
Insert the USB stick containing the image into the rear port.
Power the receiver on.
The display should read USB. Press the standby button on the side of the front to install the image.
If successful the receiver will reboot itself after the flashing process has completed.
Remove USB stick that contains the image files.

@@ Line 7: / Line 7: @@
 F4 Turbo<br />
+'''How to flash the image...'''<br />
+Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk.
-Installing an Image on the Formuler F4 Turbo
+FLASHING THE RECEIVER.
+# Power off the receiver
-It is easy to install a new image. Simply download the Formuler f4 turbo image you want and put the folder on a USB key.
+# Ensure no other USB devices are plugged into the receiver
+# Insert the USB stick containing the image into the rear port.
-Y0u put the USB key into the receiver and power on the receiver. It should read USB in the display.
+# Power the receiver on.
+# The display should read USB. Press the standby button on the side of the front to install the image.
-Press the standby button on the side of the front of the F4 Turbo to install the image.
+# If successful the receiver will reboot itself after the flashing process has completed.
+# Remove USB stick that contains the image files.
-Let it finish. The receiver will reboot when done.