Receivers:Formuler

From OpenPLi Wiki
Revision as of 14:09, 26 October 2023 by WanWizard (talk | contribs) (USB stick needs to have an MBR partition table, most boxes don't support GPT)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
RECEIVERS-Formuler-001.jpg

How to flash the receiver...
Format your USB stick with an MBR partition table and a FAT32 file system. Download a image from: https://openpli.org/download/formuler. Unpack the ZIP file and place the content on a USB disk.

  1. Power off the receiver
  2. Ensure no other USB devices are plugged into the receiver
  3. Insert the USB stick containing the image into the rear port.
  4. Power the receiver on.
  5. The display should read USB. Press the standby button on the side of the front to install the image.
  6. If successful the receiver will reboot itself after the flashing process has completed.
  7. Remove USB stick that contains the image files.

Note: In order to load the image automagically, rename the file called "noforce" to "force"