Difference between revisions of "Receivers:GI"
From OpenPLi Wiki
Rick Hunter (talk | contribs) (Created page with "'''Supported receivers<br />''' frame|right ET-7000 mini<br /> ET-11000<br />") |
Rick Hunter (talk | contribs) |
||
| Line 3: | Line 3: | ||
ET-7000 mini<br /> | ET-7000 mini<br /> | ||
ET-11000<br /> | ET-11000<br /> | ||
| + | |||
| + | '''How to flash the image...'''<br /> | ||
| + | Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk. | ||
| + | |||
| + | FLASHING THE RECEIVER. | ||
| + | # Power off the receiver | ||
| + | # Ensure no other USB devices are plugged into the receiver | ||
| + | # Insert the USB stick containing the image into the rear port. | ||
| + | # Power the receiver on. | ||
| + | # Press the standby button on the side of the front to install the image. | ||
| + | # If successful the receiver will reboot itself after the flashing process has completed. | ||
| + | # Remove USB stick that contains the image files. | ||
Revision as of 19:45, 30 April 2017
Supported receivers
ET-7000 mini
ET-11000
How to flash the image...
Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk.
FLASHING THE RECEIVER.
- Power off the receiver
- Ensure no other USB devices are plugged into the receiver
- Insert the USB stick containing the image into the rear port.
- Power the receiver on.
- Press the standby button on the side of the front to install the image.
- If successful the receiver will reboot itself after the flashing process has completed.
- Remove USB stick that contains the image files.
