Difference between revisions of "Receivers:Golden Interstar"

From OpenPLi Wiki
Jump to: navigation, search
m (USB stick needs to have an MBR partition table, most boxes don't support GPT)
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
'''Supported receivers<br />'''
+
[[File:RECEIVERS-Golden_Interstar-001.jpg|frameless|right]]
[[File:RECEIVERS-Galaxy-Innovations-001.jpg|frameless|right]]
 
Speed LX class S2/C<br />
 
 
 
  
 
'''How to flash the receiver...'''<br />
 
'''How to flash the receiver...'''<br />
Download a image from: https://openpli.org Unpack the ZIP file and place the content on a USB disk.
+
Format your USB stick with an MBR partition table and a FAT32 file system. Download a image from: https://openpli.org/download/goldeninterstar. Unpack the ZIP file and place the content on a USB disk.
 
 
# Shut down the dreambox into deep standby (use the menu or flip the power switch).
 
# Connect the dreambox and the PC to the network. You need a DHCP capable modem or server, or configure your PC to do so. If you're unsure, simply try if step 6 succeeds. If you connect the Dreambox directly to a PC, just enable the "internet sharing" function on the PC which will enable its DHCP function.
 
# Press and hold the "down" button to the left of the display. While holding the down button, press the power button or flip the switch to start it.
 
# Wait for the text "* * * STOP * * *" to appear in the display. Then you can release the down button.
 
# On the display, an IP address appears, usually in the form "192.168.1.42". Start a browser on your PC and go to this address, e.g. "http://192.168.1.42/".
 
# You should get a web page for the dreambox. At the bottom is a link that says "Upgrade firmware", follow this link.
 
# Select the image .nfi file with the browse button, and press the "Flash" button.
 
# Also press the "reboot when finished" button, so that the box will restart once the update is ready.
 

Latest revision as of 14:12, 26 October 2023

RECEIVERS-Golden Interstar-001.jpg

How to flash the receiver...
Format your USB stick with an MBR partition table and a FAT32 file system. Download a image from: https://openpli.org/download/goldeninterstar. Unpack the ZIP file and place the content on a USB disk.