Difference between revisions of "Xsarius"

From OpenPLi Wiki
Jump to: navigation, search
m (USB stick needs to have an MBR partition table, most boxes don't support GPT)
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
[[File:RECEIVERS-Xsarius-001.jpg|frameless|right]]
 
[[File:RECEIVERS-Xsarius-001.jpg|frameless|right]]
  
'''Supported receivers<br />'''
+
=='''How to flash the receiver...'''<br />==
  
Fusion HD
+
Format your USB stick with an MBR partition table and a FAT32 file system.<br />
 +
Download a image from: https://openpli.org/download/xsarius.
 +
Unpack the ZIP file and place the content on the USB stick.
  
Fusion HD SE
+
FLASHING THE RECEIVER. <br />
 
+
# Unzip compressed file.<br />
Pure HD
+
# Copy the content to a USB Pen Drive.<br />
 
+
# Power off or reboot the receiver with the mains switch on the rear. Connect USB Pen Drive.<br />
Revo 4K
+
# Power on receiver with the mains switch on the rear.<br />
 
+
# A blue screen appears with a notification that new firmware has been detected.
Galaxy 4K
+
# Press the power button on the RCU.
 +
# Flashing of the image will start, the process can be monitored on the TV<br />
 +
# When the flashing has been completed, you'll be noticed to remove the USB drive and restart the receiver.<br />

Latest revision as of 14:35, 26 October 2023

RECEIVERS-Xsarius-001.jpg

How to flash the receiver...

Format your USB stick with an MBR partition table and a FAT32 file system.
Download a image from: https://openpli.org/download/xsarius. Unpack the ZIP file and place the content on the USB stick.

FLASHING THE RECEIVER.

  1. Unzip compressed file.
  2. Copy the content to a USB Pen Drive.
  3. Power off or reboot the receiver with the mains switch on the rear. Connect USB Pen Drive.
  4. Power on receiver with the mains switch on the rear.
  5. A blue screen appears with a notification that new firmware has been detected.
  6. Press the power button on the RCU.
  7. Flashing of the image will start, the process can be monitored on the TV
  8. When the flashing has been completed, you'll be noticed to remove the USB drive and restart the receiver.