Difference between revisions of "Main Page"

Revision as of 08:22, 3 September 2019

18.191.97.229, Welcome to the OpenPLi Wiki

• Releasenotes

OpenPLi - Installation and configuration:

• Supported receivers

Overview of all supported receivers and how to flash your receiver. Also there is a comparison table were many receivers are listed and are compared right down to component level, so you can make an easier choice if you want to buy one. Also there is a special table that gives the power consumption of many receivers.

• OpenPLi installation

Here will be explained how to install OpenPLi on your receiver, various methods are explained and below are the various links that you might need. The link to the what, how and why to backup is recommended.

• OpenPLi configuration

Here is explained how you can configure OpenPLi

• Backup

Before you update, upgrade or change anything it is good to have a backup. Here the plugins "Autobackup" (by default installed), the "BackupSuite" (has to be installed) and some models which have an internal backup function are explained.

• Cable settings information

Looking for network ID's, symbolrates and frequency's to scan your cable channels..? Here you can find the information of our cable provider.

• Channel settings for satellite receivers

Channel settings file for various satellites.

• Data sharing

If you want to share your data like a NAS, OpenPLi receiver, PC (desktop, notebook) or any other medium using NFS, CIFS (SMB/Samba), this is were to look.

• External device support

Here you will find a list of known external devices that are known to work with OpenPLi.

• Softcam Wiki

When you want to look at encrypted channels and not only Free to Air (FTA) you can use a softcam. In this section is explained how to install and use a few.

• Tips and Tweaks

Many useful tips on various stuff on working with OpenPLi, Putty, SSD useful or not, debugging, how to crashlog, etc. etc.

• Problems and Solutions

This section deals with all kind of problems and possible solutions. If you run into a problem using OpenPLi you can take a peak here to find a solution.

OpenPLi - Functions and default plugins

• Hidden functions

Some functions are not easy to find, but can be very helpful, here there are a few.

• HDMI-CEC

This feature can make your devices work better together, so like using one remote to control TV and receiver. Note it is turned off by default

• Hotkey

With this function Hotkeys can be (un)selected to make things easier.

• Media playing

Here the mountmanager is explained. It is used to mount (make) accessible external drives, like with a NAS or (the harddisk of) other receivers. Mounting means associating a storage device to a particular location in the directory tree.

• MountManager

Although a SetTopBox (STB) isn't a media player most media files can be played, like MP3, MKV, AVI etc. These files can be played using Gstreamer. Gstreamer isn't something you have to select, the only thing you have to do is go to the file you want to be played and press 'OK' or use the Play button on your remote and the file will start. Most remotes have a button on there remote like PVR, Playlist, Recording list, Media or something that points to playing recorded files, these names are chosen, as it is STB an thus meant to play recordings and not all kinda media files. I you want to read more about Gstreamer follow this link.

• Plugin browser

If want to extend the functions of OpenPLi you can install plugins from the feed (=the technical name where the plugins are stored) . Remember these plugins are not maintained by OpenPLi, so always backup before installing.

• Plugins

In the OpenPLi feed are many plugins. Here is explained, like what these plugins can do and how some of these plugins work, Refresh Bouqet, Autotimer, etc.

• Fallback remote receiver

This function gives you the option to use the tuners from another OpenPLi receiver, whether they are wired or wireless (WiFi) connected. This way you can watch TV when there is no access to satellite or cable or expand your number of tuners.

• Webif

Webif makes it possible to access your receiver from any “node” (PC, tablet, phone, etc.) as long as they have a network connection, wired or wireless (WiFi or UTP). Here there is Information about the Webif (webinterface) and how to access and configure it.

OpenPLi - Information for advanced users

• Knowledge base

Many useful information on various subjects, to name but a few; GStreamer, HbbTV, Overscan, Satfinders, TV-headend, Unicable and VPN

OpenPLi - Information for developers

• Information for developers

Info for developers and some basic Git commands.

• How to create a bootlogo

OpenPLi - Information for translators

• Information for translators

OpenPLi is always looking for help to have it translated properly in many languages. Here there is information, FAQ etc. to help you along the way.

OpenPLi - Faits divers

• History

• UP-Download magazine (Dutch language)

π