Releases

Attention!!

Attention Although 8.1 is a minor update, you MUST flash it!

Major releases (like 7 => 8) you must flash, preferably using the menu and choosing the backup option, then everything is restored after the flash. When there is no Hard disk present use an USB stick. 

Minor releases (like 7.1 => 7.3) are updates, so updating will suffice!

OpenPLi 8.1 - A bit too late

Release date 20 august 2021

Hello 18.222.20.30,

So we are pleased to announce the release of OpenPLi 8.1. Due to issues with the version database on our build server farm when doing a major hardware upgrade, you MUST flash this version. If you update an existing 8.0 image, the result is undefined, due to incorrect package versions.

See the releasenotes

OpenPLi 8.0 - Eight is great

Release date 30 december 2020

So we are pleased to announce the release of OpenPLi 8. As this is a major release it was build with a new OE version and flashing is needed, so you can not update to get to version 8. Flashing is preferably done from the menu.

With this release there is new stuff and of course many improvements and it is now available for download at OpenPLi. So come and follow the link below and have a look at the release notes of OpenPLi 8 to see what has changed.

See the releasenotes

OpenPLi 7.3 - Fine tuning a seasoned image

Release date 15 july 2020

Already in it's 4th fase, OpenPLi 7 has been fine tuned and we are pleased to announce this latest release of OpenPLi. Now it is available for download at OpenPLi. So come and follow the link below and have look at the release notes of OpenPLi 7.3 to see the highlights of what has changed.

See the releasenotes

OpenPLi 7.2 - Higher and better

Release date 7 December 2019

We are pleased to announce the latest release of OpenPLi and it is now available for download at OpenPLi. As of this version, new in the release notes are the details on driver updates per vendor. So come and follow the link below and have a look at the release notes of OpenPLi 7.2 to see the highlights of what has changed.

There were release updates on 2^nd and one on 23^rd march of 2020, these have bugfixes and introduces new images for the Octagon SF8008 and Edision OS Mini 4K, further details are in the release notes link below

See the releasenotes

Attention!!

• Due to a server hardware crash the 7.0-release and 7.1-release images were lost
• Due to the fact all 7-release images share the same feed, only the last version can be build and that is 7.2
• If you are currently on OpenPLi 7.0 or 7.1, DO NOT USE software update, but use the "Flash Image" menu option!

OpenPLi 7.1 - Better than 7

Release date 22 June 2019

Adding support for the Vu Duo4K, the Gamma Curve and a few more, also more functionality added; like multiboot for certain receivers. So come and follow the link below and have look at the release notes of OpenPLi 7.1.

Note: Combined tuners must be reconfigured after an update or flash. This is due to improving tuner management, which is not fully backwards compatible. Tuners that can work 'combined' are therefore 'default' disabled here.
See the releasenotes

Attention!!

• Due to a server hardware crash the 7.0-release and 7.1-release images were lost
• Due to the fact all 7-release images share the same feed, only the last version can be build and that is 7.2
• If you are currently on OpenPLi 7.0 or 7.1, DO NOT USE software update, but use the "Flash Image" menu option!

OpenPLi 7.0 - Many improvements

Release date 13 January 2019

Support for the Gamma Curve (aka SDR/HDR/HLG), changes to Samba, Fallback tuner possibilities extended, support for many Wifi USB chipsets, bugfixes and introduction of new features.

With this release:

• OpenPLi 6.x has been declared end-of-support. It will no longer receive any bugfixes. Channel lists, transponder XML's and picons will be updated on a weekly basis, until it becomes end-of-life at the release of OpenPLi 8.
• OpenPLi 4 has been declared end-of-life. It will not be built anymore, and can no longer be downloaded for receivers for which an OpenPLi 6 exists. Receivers for which OpenPLi 4 was the last supported version are declared end-of-life on our download pages.

See the releasenotes

Attention!!

• Due to a server hardware crash the 7.0-release and 7.1-release images were lost
• Due to the fact all 7-release images share the same feed, only the last version can be build and that is 7.2
• If you are currently on OpenPLi 7.0 or 7.1, DO NOT USE software update, but use the "Flash Image" menu option!

OpenPLi 6.2 - Tweak and Tune.

Release date 14 April 2018

New receiver support for Zgemma support for the H9, Axas E4HD 4K Ultra, Qviart Lunix / Lunix3 4K. New drivers for the Xtend ET8000 / ET1000 Bugfixes and introduction of new features.

Known Issues

• Mode 12 is not always possible due to hardware limitations of the SOC. Further investigation is needed.

See the releasenotes

OpenPLi 6.1 - Improvement of a good image.

Release date 22 December 2017

New receiver support for Amiko Viper Combo, Amiko Viper T2/C, VU+ Uno 4K SE, Zgemma H6, Edision OSnino. Bugfixes and introduction of new features.

Known Issues

• Due to problems with the overscan wizard, Xtrend ET8000 and ET10000 images can have display problems. We are still looking for a solution for this problem.
• On a Mutant HD51 with mode 12 active, you can not use Video 60p frequency. With mode 1 everything is fine.
• If you upgrade on the box, avahi-daemon might not want to restart (see fix in the releasenotes).

See the releasenotes

OpenPLi 6.0 - The long awaited OpenPLi 6.0 heralds a new era of OpenPLi images.

Release date 24 June 2017

As of this release, we no longer release automated nightly beta images, but use a develop -> release candidate -> release flow, with fully tested and stable images as a result.

Known Issues

• When you create a CIFS mapping to a device mounted under /media, you get an "out of space on device" error. We are still looking for a solution for this problem.
• The xmltvimport plugin no longer exists. This may give an error if you restore a backup of OpenPLi 4 on OpenPLi 6.0. To address this, install EPGimport from the plugin menu.

See the releasenotes